• C. Soenmez, V. Venkatachalam, S. Spierling, H.-J. Endres, L. Barner (2024): Environmental potential of recycling of plastic wastes in Australia based on life cycle assessmentJournal of Material Cycles and Waste Management
    DOI: 10.1007/s10163-024-01901-1
  • G. S. Hilmarsdóttir, B. Margeirsson, S. Spierling, O. Ögmundarson (2024): Environmental impacts of different single-use and multi-use packaging systems for fresh fish exportJournal of Cleaner Production Volume 447, 1. April 2024, 141427
    DOI: 10.1016/j.jclepro.2024.141427
  • V. Venkatachalam, S. Spierling, H.-J. Endres (2024): Recyclable, but not recycled — an indicator to quantify the environmental impacts of plastic waste disposalFrontiers in Environmental Science
    DOI: 10.3389/fenvs.2024.1316530
  • A. Bhalerao, U. Dueker, M. Weber, A. Eich, C. Lott, H.-J. Endres, R. Nogueira (2023): Bacterial diversity of biofilms on polyhydroxybutyrate exposed to marine conditions: Ex-situ vs. in-situ testsScience of The Total Environment, Volume 905, 2023
    DOI: 10.1016/j.scitotenv.2023.167458
  • C. Emonde, M. Reulbach, P. Evers, H. Behnsen, F. Nürnberger, E. Jakubowitz, H. Windhagen (2023): Influence of fluid uptake on the mechanical and thermal properties of PMMA-based bone cementThe European Orthopaedic Research Society (EORS) 31st Annual Meeting, Porto, Portugal, 27–29 September 2023. Part 2 of 2.
    DOI: 10.1302/1358-992X.2024.2.033
  • H.-J. Endres, M. Shamsuyeva (2023): Composites-Recycling StudieAVK – Industrievereinigung Verstärkte Kunststoffe e.V., Frankfurt am Main
    ISBN: 978-3-00074-217-0
  • M. A. R. Harding, A. J. Boyd, S. Siljeström, A. Shivayogimath, H. O. Sørensen, M. Shamsuyeva, P. Aliuos, M. T. Rosing, T. Hassenkam (2023): Analyzing Organic Compounds Trapped within 3.7 Billion Years Old Liquid InclusionsGoldschmidt 2023 Conference, Lyon, 9.-14. Juli 2023
    DOI: 10.7185/gold2023.17018
  • M. Jürgens, K. Hartmann, H.-J. Endres, S. Spierling (2023): Life Cycle Assessment of Higher Education Institutions – Method and Case StudyJournal of Cleaner Production, Volume 430, 2023
    DOI: 10.1016/j.jclepro.2023.139649
  • M. Mudersbach, M. Jürgens, M. Pohler, S. Spierling, V. Venkatachalam, H.-J. Endres, L. Barner (2023): Life Cycle Assessment in a Nutshell – Best Practices and Status Quo for the Plastic SectorMacromolecular Rapid Communications, 2023
    DOI: 10.1002/marc.202300466
  • M. Reulbach, P. Evers, C. Emonde, H. Behnsen, F. Nürnberger, H. Windhagen, E. Jakubowitz (2023): Implications of ageing effects on thermal and mechanical properties of PMMA-based bone cement for THA revision surgeryJournal of the Mechanical Behavior of Biomedical Materials, Volume 148, 2023, 106218
    DOI: 10.1016/j.jmbbm.2023.106218
    ISSN: 1751-6161
  • R. R. Nair, A. Schaate, L. F. Klepzig, A. E. Turcios, J. Lecinski, M. Shamsuyeva, H.-J. Endres, J. Papenbrock, P. Behrens, D. Weichgrebe (2023): Physico-chemical characterization of walnut shell biochar from uncontrolled pyrolysis in a garden oven and surface modification by ex-situ chemical magnetizationClean Technologies and Environmental Policy
    DOI: 10.1007/s10098-023-02525-z
  • R. R. Nair, P. A. Kißling, A. Marchanka, J. Lecinski, A. E. Turcios, M. Shamsuyeva, N. Rajendiran, S. Ganesan, S. V. Srinivasan, J. Papenbrock, D. Weichgrebe (2023): Biochar synthesis from mineral and ash-rich waste biomass, part 2: characterization of biochar and co-pyrolysis mechanism for carbon sequestrationSustainable Environment Research volume 33, Article number: 14
    DOI: 10.1186/s42834-023-00176-9
  • R. R. Nair, P. A. Kißling, A. Schaate, A. Marchanka, M. Shamsuyeva, P. Behrens, D. Weichgrebe (2023): The influence of sample mass (scaling effect) on the synthesis and structure of non-graphitizing carbon (biochar) during the analytical pyrolysis of biomassRSC Advances, Issue 20
    DOI: 10.1039/D3RA01911J
  • F. Bittner, H.-J. Endres (2022): µCT-Based Topography Analysis of Inaccessible Surfaces Exemplified by a Biofouling-Covered Plastic Chemie Ingenieur Technik, 94, S. 186-193
    DOI: 10.1002/cite.202100170
  • H.-J. Endres (2022): Biodegradable Plastics: End of Life ScenariosPlastics in the Aquatic Environment - Part I. The Handbook of Environmental Chemistry, vol 111. Springer, Cham., 69-109
    DOI: 10.1007/698_2021_745
    ISBN: 978-3-030-84117-1
  • L. Veltmaat, F. Mehrens, H.-J. Endres, J. Kuhnert, P. Suchde (2022): Mesh-free simulations of injection molding processesPhysics of Fluids 34
    DOI: 10.1063/5.0085049
  • M. Koch, S. Spierling, V. Venkatachalam, H.-J. Endres, M. Owsianiak, E. Blikra Vea, C. Daffert, M. Neureiter, I. Fritz (2022): Comparative assessment of environmental impacts of 1st generation (corn feedstock) and 3rd generation (carbon dioxide feedstock) PHA production pathways using life cycle assessmentScience of The Total Environment, 2022, 160991
    DOI: 10.1016/j.scitotenv.2022.160991
    ISSN: 0048-9697
  • M. Shamsuyeva (2022): Recycling von post-industriellen und post-consumer Textilabfällenphi – Produktionstechnik Hannover informiert, Newsletter Nr. 34 / März 2022
    DOI: 10.48811/phi-22-004
    ISSN: 2198-1922
  • M. Shamsuyeva (2022): Kunststoffrecycling: Wie Normen den Technologietransfer beschleunigenphi – Produktionstechnik Hannover informiert, Newsletter Nr. 36 / September 2022
    DOI: 10.48811/phi-22-017
    ISSN: 2198-1922
  • Ó. Ögmundarson, L. S. Kalweit, V. Venkatachalam, R. Kristjánsdóttir, H.-J. Endres, S. Spierling (2022): Plastic Packaging Waste Management in Iceland: Challenges and Opportunities from a Life Cycle Assessment PerspectiveSustainability 2022, 14, 16837
    DOI: 10.3390/su142416837
  • V. Venkatachalam, M. Pohler, S. Spierling, L. Nickel, L. Barner, H.-J. Endres (2022): Design for Recycling Strategies Based on the Life Cycle Assessment and End of Life Options of Plastics in a Circular EconomyMacromolecular Chemistry and Physics, 0(0):2200046
    DOI: 10.1002/macp.202200046
    ISSN: 1022-1352
  • Y. Celik, M. Shamsuyeva, H.-J. Endres (2022): Thermal and Mechanical Properties of the Recycled and Virgin PET - Part IPolymers 14, Nr. 7, S. 1326
    DOI: 10.3390/polym14071326
  • B. Kötter, J. Endres, J. Körbelin, F. Bittner, H.-J. Endres, B. Fiedler (2021): Fatigue and fatigue after impact behaviour of Thin- and Thick-Ply composites observed by computed tomographyComposites Part C: Open Access, 5, 100139
    DOI: 10.1016/j.jcomc.2021.100139
  • D. Iliew, S. Kroll, A. Siebert-Raths (2021): Compounding of Natural Fiber Reinforced PlasticsKlemens Kohlgrüber, Michael Bierdel, Harald Rust (Hg.): Plastics Compounding and Polymer Processing: Fundamentals, Machines, Equipment, Application Technology, München, S. 263-278
    ISBN: 978-1-56990-837-2
  • E. Blikra Vea, S. Fabbri, S. Spierling, M. Owsianiak (2021): Inclusion of multiple climate tipping as a new impact category in life cycle assessment of polyhydroxyalkanoate (PHA)-based plasticsScience of The Total Environment
    DOI: 10.1016/j.scitotenv.2021.147544
  • F. Bittner, H.-J. Endres (2021): Determining fiber orientation with computed tomographyphi-Magazin Weitere Informationen
  • F. Bittner, H.-J. Endres (2021): Faserorientierungen verlässlich mittels CT bestimmenphi-Magazin Weitere Informationen
    DOI: 10.48811/phi-21-012
  • F. Bittner, H.-J. Endres (2021): Schonen biobasierte Kunststoffe das Ökosystem Meer?Technologie-Informationen 1+2 | 2021
  • H.-J. Endres (2021): The Dawning of Circular EconomyKunststoffe international, 1/2021
  • H.-J. Endres, S. Spierling, V. Venkatachalam (2021): Kunststoffe und Nachhaltigkeit - Ein Widerspruch?Unimagazin 1/2_2021 "Mission 2021. Zukunft denken - nachhaltig handeln"
  • J. Körbelin, P. Goralski, B. Kötter, F. Bittner, H.-J. Endres, B. Fiedler (2021): Damage tolerance and notch sensitivity of bio-inspired thin-ply Bouligand structuresComposites Part C: Open Access, 5, 100146
    DOI: 10.1016/j.jcomc.2021.100146
  • L. Pollok, S. Spierling, H.-J. Endres, U. Grote (2021): Social Life Cycle Assessments: A Review on Past Development, Advances and Methodological ChallengesSustainability, 13(18):10286
    DOI: 10.3390/su131810286
  • L. Veltmaat, H.-J. Endres, F. Bittner (2021): Einfluss von Abweichungen der zugrundeliegenden Faserorientierungen auf die Struktursimulation von kurzfaserverstärkten KunststoffenNAFEMS Magazin 2021, 3/2021, S. 56-63
  • L. Veltmaat, H.-J. Endres, F. Bittner (2021): Bewertungsmethodik kommerziell erhältlicher Homogenisierungs-Software für die optimierte Simulation des mechanischen Verhaltens kurzfaserverstärkter KunststoffeZeitschrift Kunststofftechnik / Journal of Plastics Technology 17, 3, 129–151 Weitere Informationen
    DOI: 10.3139/O999.01032021
  • M. Shamsuyeva, H.-J. Endres (2021): Plastics in the context of the circular economy and sustainable plastics recycling: Comprehensive review on research development, standardization and marketComposites Part C: open access, Vol. 6
    DOI: 10.1016/j.jcomc.2021.100168
  • R. Andini, M. I. Sulaiman, Martunis, A. H. Umam, M. Olivia, H.-J. Endres (2021): Biopolymer nanocomposites: their mechanical, thermal, and gas barrier properties for food packagingIOP Conference Series: Earth and Environmental Science, Volume 667
    DOI: 10.1088/1755-1315/667/1/012067
  • C. Kummerlöwe, H.-J. Endres, M. Susoff (2020): Synthese von Makromolekülen, PolyreaktionenS. Seiffert, W. Schärtl, C. Kummerlöwe, N. Vennemann (Hrsg.), Makromolekulare Chemie.
    DOI: 10.1007/978-3-662-61109-8_3
    ISBN: 978-3-662-61108-1
  • F. Wurm, S. Spierling, H.-J. Endres, L. Barner (2020): Plastics and the Environment - Current Status and Challenges in Germany and AustraliaMacromolecular Rapid Communications 17/2020
    DOI: 10.1002/marc.202000351
  • H.-J. Endres (2020): Aufbruch ins Zeitalter der Kreislaufwirtschaft - Bilanz der K 2019: Die Kunststoffbranche hat ihre Verantwortung erkanntKunstoffe 01/2020, S. 32-35
  • H.-J. Endres (2020): The Dawning of the Circular Economy - A Stock-Take of K 2019: The Plastics Sector Has Owned up to Its ResponsibilityKunststoffe international 01/2020, S. 19-21
  • H.-J. Endres (2020): Recycling ist nicht gleich RecyclingPOLYPROBLEM Report 12/2020, S. 34-39
  • H.-J. Endres, M. Mudersbach, H. Behnsen, S. Spierling (2020): Biokunststoffe unter dem Blickwinkel der Nachhaltigkeit und Kommunikation
    ISBN: 978-3-658-27795-6
  • H.-J. Endres, M. Shamsuyeva (2020): Kreislaufwirtschaft braucht bessere Standards - Standards und Qualität von Kunststoff-Rezyklaten - eine BestandsaufnahmePlastverarbeiter 6
  • J. Winkelmann, M. Shamsuyeva, H.-J. Endres (2020): Hybrid fabrics for use in bio-based composites for technical applicationsMaterials Today: Proceedings
    DOI: 10.1016/j.matpr.2019.12.097
  • M. Shamsuyeva (2020): Keine Daten, kein MarktPOLYPROBLEM Report 12/2020, S. 40-43
  • M. Shamsuyeva, B. P. Chang, N. Vellguth, M. Misra, A. Mohanty, H.-J. Endres (2020): Surface Modification of Flax Fibers for Manufacture of Engineering Thermoplastic BiocompositesJournal of Composites Science, 4, 64
    DOI: 10.3390/jcs4020064
  • M. Shamsuyeva, H.-J. Endres (2020): Effect of the polyethyleneimine coating on the bending properties of the natural fiber-reinforced biocompositesAcademic Journal of Polymer Science 3, 4
    DOI: 10.19080/AJOP.2020.03.555619
  • M. Shamsuyeva, O. Hansen, H.-J. Endres (2020): Review on Hybrid Carbon/Flax Composites and Their PropertiesPrime Archives in Polymer Technology
    ISBN: 978-81-944664-6-8
  • R. Vogel, C. Drebenstedt, S. Szyniszewski, F. Bittner, T. Fras, L. Blanc (2020): Metal Foams with Ceramic Inserts for Security ApplicationsProceedings of the 11th International Conference on Porous Metals and Metallic Foams (MetFoam 2019). The Minerals, Metals & Materials Series. Springer, Cham, pp. 137-147
    DOI: 10.1007/978-3-030-42798-6_13
    ISBN: 978-3-030-42798-6
  • R. Wascher, F. Bittner, G. Avramidis, M. Bellmann, H.-J. Endres, H. Militz, W. Viöl (2020): Use of computed tomography to determine penetration paths and the distribution of melamine resin in thermally-modified beech veneers after plasma treatmentComposites Part A: Applied Science and Manufacturing
    DOI: 10.1016/j.compositesa.2020.105821
  • S. Kroll, D. Iliew, A. Siebert-Raths (2020): Thermoplastic biocomposites based on agro waste materials - Wheat straw fibres and their effect on reinforcement, filling and odour formationbio-fibre Magazine, 5-6/2020
  • S. Spierling, V. Venkatachalam, M. Mudersbach, N. Becker, C. Herrmann, H.-J. Endres (2020): End-Of-Life Options for Bio-Based Plastics in a Circular Economy - Status Quo and Potential from a Life Cycle Assessment PerspectiveResources 9(7)
    DOI: 10.3390/resources9070090
  • S. Szyniszewski, R. Vogel, F. Bittner, E. Jakubczyk, M. Anderson, M. Pelacci, A. Chinedu, H.-J. Endres, T. Hipke (2020): Non-cuttable material created through local resonance and strain rate effectsScientific Reports 10, 11539
    DOI: 10.1038/s41598-020-65976-0
  • A. du Plessis, S. G. le Roux, J. Waller, P. Sperling, N. Achilles, A. Beerlink, J.-F. Métayer, M. Sinico, G. Probst, W. Dewulf, F. Bittner, H.-J. Endres, M. Willner, Á. Drégelyi-Kiss, T. Zikmund, J. Laznovsky, J. Kaiser, P. Pinter, S. Dietrich, E. Lopez, O. Fitzek, P. Konrad (2019): Laboratory X-ray tomography for metal additive manufacturing: Round robin testAdditive Manufacturing 30, 100837
    DOI: 10.1016/j.addma.2019.100837
  • B. Lahl, N. Pyatov, C. Busch, S. Hartmann, H.-J. Endres (2019): Numerical an experimental investigation of fiber reinforced biocomposites as structural parts in automotive applicationsK. Dröder, T. Vietor (Hg.): Technologies for economical and functional lightweight design. Conference proceedings (Book) S. 189-200 (Zukunftstechnologien für den multifunktionalen Leichtbau)
    ISBN: 978-3-662-58206-0
  • D. Iliew, S. Kroll, A. Siebert-Raths (2019): Compoundierung von naturfaserverstärkten KunststoffenPolymer-Aufbereitung und Kunststoff-Compoundierung: Grundlagen, Apparate, Maschinen, Anwendungstechnik, S. 270-286
    ISBN: 978-3-446-45832-1
  • F. Bittner, J. Winkelmann, H.-J. Endres (2019): Verarbeitung von Recycling-Carbonfasern zu leistungsfähigen unidirektionalen VerbundwerkstoffenTagungsband 9. Wissenschaftskongress Abfall- und Ressourcenwirtschaft, Amberg-Weiden, 14.-15. März 2019, 14-15
    ISBN: 978-3-903187-48-1
  • H.-J. Endres (2019): Das Erreichte nicht verspielenK-Magazin 02/2019
  • H.-J. Endres (2019): BioplasticsAdvances in Biochemical Engineering/Biotechnology, Biorefineries 166), 427-468
    DOI: 10.1007/10_2016_75
  • J. Teuwsen, F. Bittner, J. P. Steffen, H.-J. Endres (2019): Evaluation of X-ray target materials to improve CT-based measurement of fiber orientations inside CF-SMC componentsConference proceedings: International Symposium on Digital Industrial Radiology and Computed Tomography – DIR2019, Fürth, 2.-4. Juli 2019
  • M. Shamsuyeva, J. Winkelmann, H.-J. Endres (2019): Manufacture of hybrid natural / synthetic fiber woven textiles for use in technical biocomposites with maximum biobased contentJournal of Composites Science, 3, 17
    DOI: 10.3390/jcs3020043
  • M. Shamsuyeva, O. Hansen, H.-J. Endres (2019): Review on hybrid carbon-/flax composites and their propertiesInternational Journal of Polymer Science
    DOI: 10.1155/2019/9624670
  • M. Shamsuyeva, O. Hansen, H.-J. Endres (2019): Review on Hybrid Carbon/Flax Composites and Their PropertiesInternational Journal of Polymer Science
    DOI: 10.1155/2019/9624670
  • N. Lack, H.-J. Endres (2019): Agrarfolien - in Kreisläufen denkenLand & Forst: Landwirtschaft und Landleben in Niedersachsen, 172, 6, 12 - 13
  • N. Lack, H.-J. Endres (2019): Biokunststoffe aus LandwirtschaftLZ Rheinland 186, 10, 25-26
  • N. Lack, H.-J. Endres (2019): Müllvermeidung und nationale Wertschöpfung. Biokunststoffe aus der LandwirtschaftBauernblatt 169, 47-48
  • N. Lack, H.-J. Endres (2019): Kunststoffe aus der LandwirtschaftSchweizer Landtechnik, April 2019, 52–53
  • N. Vellguth, T. Rudeck, M. Shamsuyeva, F. Renz, H.-J. Endres (2019): Thermal Stability of Natural Fibers via Thermoset Coating for Application in Engineering ThermoplasticsKey Engineering Materials, 809, 433-438
    DOI: 0.4028/www.scientific.net/kem.809.433
  • S. Spierling, V. Venkatachalam, H. Behnsen, C. Herrmann, H.-J. Endres (2019): Bioplastics and Circular Economy - Performance Indicators to Identify Optimal PathwaysL. Schebek, C. Herrmann, F. Cerdas (Hrsg.), Progress in Life Cycle Assessment. Sustainable Production, Life Cycle Engineering and Management. Springer, Cham
    DOI: 10.1007/978-3-319-92237-9_16
    ISBN: 978-3-319-92236-2
  • B. Plinke, F. Bittner, H.-J. Endres (2018): Messung der Dichteverteilung in Holzpartikelwerkstoffen in drei Dimensionen mit ComputertomographieWagenführ (Ed.) Tagungsband des 18. Holztechnologischen Kolloquiums, Dresden, 12.-13. April, 208-217
    ISBN: 978-3-86780-558-2
  • C. Haxter, H.-J. Endres (2018): Faserverstärkte Duromere – nicht recycelbar? Doch!kunststoffland NRW report, 1/2018, 38
  • C. Panescu, A. Dörgens, L. Mundzeck, H.-J. Endres (2018): Biohybidwerkstoffe für die LuftfahrtTechnologie-Informationen, 1-2/2018, 17
  • C. Panescu, J. Winkelmann, H.-J. Endres (2018): Quality Analysis of Downcycling Processes for Carbon Recyclatesbio-fibre Magazine, 5-6/2018, 2-7
  • D. Jahn, L. Mundzeck, H.-J. Endres (2018): Mehr als kalter KaffeeTechnologie-Informationen, 1-2/2018, 18
  • F. Bittner, H.-J. Endres (2018): Investigation of Failure Mechanisms in Hybrid Fiber-Reinforced Plastics by Means of In-Situ-CTHybrid - Materials and Structures 2018 - Proceedings, Bremen, 114-119
    ISBN: 978-3-88355-417-4
  • F. Bittner, M. Bellmann, M. Shamsuyeva, H.-J. Endres, W. Viöl (2018): Improving the Durability of Bio Hybrid Fiber Reinforced Plastics by Plasma TreatmentDröder, K., Vietor, T. (Eds.) Technologies for economical and functional lightweight design. Conference proceedings 2018 (Zukunftstechnologien für den multifunktionalen Leichtbau), 201-212
    DOI: 10.1007/978-3-662-58206-0
    ISBN: 978-3-662-58206-0
  • H. Behnsen, S. Spierling, H.-J. Endres (2018): Biobasierte Kunststoffe als Produkt der BioökonomieÖkologisches Wirtschaften 1, 28-29
    DOI: http://dx.doi.org/10.14512/OEW330128
  • L. Mundzeck, H.-J. Endres (2018): PLA-Abfälle im AbfallstromKunststoffxtra, 1-2/2018, 29
  • M. Neudecker, H.-J. Endres, A. Siebert-Raths, R. Messing, P. F. Filz (2018): Digital Preview of Bio-Based Parts. Injection molding simulation of bioplastics. Comparison of bioplastics simulation and real injection moulding processKunststoffe international 2018/11, S. 46-49
  • M. Neudecker, H.-J. Endres, A. Siebert-Raths, R. Messing, P. F. Filz (2018): Virtuelle Vorschau auf biobasierte BauteileKunststoffe 11/2018, 94-97
  • M. Neudecker, N. Lack, H.-J. Endres (2018): Dimensional stability of injection moulded bioplasticsbioplastics magazine, 3/2018, 14-15
  • N. Vellguth, M. Shamsuyeva, S. Kroll, F. Renz, H.-J. Endres (2018): Electrical conductivity in biocomposites via polypyrrole coatingJournal of Materials Science Materials in Electronics 30, 2373-2381
    DOI: 10.1007/s10854-018-0510-2
  • O. Hansen, C. Habermann, H.-J. Endres (2018): Bio-based Materials for Exterior Applications – Project BioHybridCarDröder, K., Vietor, T. (Eds.) Technologies for economical and functional lightweight design. Conference proceedings 2018 (Zukunftstechnologien für den multifunktionalen Leichtbau), 189-200
    ISBN: 978-3-662-58206-0
  • S. Spierling, C. Röttger, V. Venkatachalam, M. Mudersbach, C. Herrmann, H.-J. Endres (2018): Bio-based Plastics – A Building Block for the Circular Economy?Procedia CIRP, 69, 573-578
    DOI: 10.1016/j.procir.2017.11.017
  • S. Spierling, E. Knüpffer, H. Behnsen, M. Mudersbach, H. Krieg, S. Springer, S. Albrecht, C. Herrmann, H.-J. Endres (2018): Bio-based plastics – A review of environmental, social and economic impact assessmentsJournal of Cleaner Production, 185, 476-491
  • V. Venkatachalam, S. Spierling, H.-J. Endres, A. Siebert-Raths (2018): Integrating Life Cycle Assessment and Eco-design Strategies for a Sustainable Production of Bio-based PlasticsDesigning Sustainable Technologies, Products and Policies, 487-597, Springer International Publishing
    DOI: 10.1007/978-3-319-66981-6
    ISBN: 978-3-319-66981-6
  • V. Venkatachalam, S. Spierling, R. Horn, H.-J. Endres (2018): LCA and Eco-design: Consequential and Attributional Approaches for Bio-based PlasticsProcedia CIRP, 69, 579-584
    DOI: 10.1016/j.procir.2017.11.086
  • B. Plinke, F. Bittner, H.-J. Endres (2017): Dichteverteilung und Partikelstrukturen von Holzwerkstoffen – Computertomographie an „kleinen“ und „großen“ Proben. Kurzoriginal.Tagungsband zum 12. Holzwerkstoffkolloquium, Dresden, 14.-15. Dezember 2017, 12-13
  • D. Bellusova, S. Mauer, H.-J. Endres (2017): Mechanisches Recycling von Polylactid-AbfallTagungsband „Waste to Ressources 2017“, Hannover, 16.-18. Mai, Göttingen, 254-265
  • D. Jahn, A. Siebert-Raths, H.-J. Endres (2017): Long-term Stability of Bio-Based Plastics – Investigation of the Effectiveness of Hydrolysis Stabilizers by Means of DSCOnSet16, 14-17
  • D. Jahn, A. Siebert-Raths, H.-J. Endres (2017): Langzeitbeständigkeit von biobasierten Kunststoffen – Untersuchung der Wirkungsweise von Hydrolysestabilisatoren mittels DSC.OnSet16, 14-17
  • E. M. Mentzel, H.-J. Endres (2017): BiokunststoffeM. Myska (Hg.). Der TÜV-Umweltmanagement-Berater. TÜV Media GmbH, 2017, 5. Ergänzung / Aktualisierung
  • H.-J. Endres (2017): Bio-Based Thermoplastic and Thermosets PolymerO. Faruk, J. Tjong, M. Sain (Hg.): Lightweight and Sustainable Materials for Automotive Applications
    ISBN: 978-1498756877
  • H.-J. Endres (2017): 10 Years AgoBioplastics magazine 3/2017, 42
  • H.-J. Endres, A. Siebert-Raths, S. Spierling, L. Mundzeck (2017): Biokunststoffe im Einsatz für eine nachhaltige WirtschaftTechnologie-Informationen 4/2017, 14-15
  • H.-J. Endres, C. Uthoff, M. Nelles (2017): Filler with Lightweight Potential. Recycling of Natural Fiber-Reinforced Polymers to Sustainable Pyrolysis Char FillerKunststoffe international 3, 62–65
  • H.-J. Endres, C. Uthoff, M. Nelles (2017): Alles hat ein Ende, nur der Kunststoff nicht. Recycling naturfaserverstärkter Polymere zum nachhaltigen Füllstoff PyrolysekohleKunststoffe 3, 88-92
  • IfBB - Institut für Biokunststoffe und Bioverbundwerkstoffe (2017): Biopolymers - facts and statistics
  • K. Albrecht, E. Baur, H.-J. Endres, R. Gente, N. Graupner; M. Koch, M. Neudecker, T. Osswald, P. Schmidtke, S. Wartzack, K. Webelhaus, J. Müssig (2017): Measuring fibre orientation in sisal fibre-reinforced, injection moulded polypropylene - Pros and cons of the experimental methods to validate injection moulding simulation.Journal Composites Part A, Applied Science and Manufacturing 95, 54–64
    DOI: 10.1016/j.compositesa.2016.12.022
  • L. Henke, N. Zarrinbakhsh, H.-J. Endres, M. Misra, A. K. Mohanty (2017): Biodegradable and Bio-based Green Blends from Carbon Dioxide-Derived Bioplastic and Poly(Butylene Succinate)Journal of Polymers and the Environment 25, 499-509
  • M. Mudersbach, S. Spierling, H. Behnsen, E. Knüpffer, S. Albrecht, H. Krieg, C. Schulze, C. Herrmann, H.-J. Endres (2017): Wie „bio“ sind Biokunststoffe? Die Nachhaltigkeit von zuckerbasierten und konventionellen Kunststoffen im Fokus.V. Koesling, R. Spierling (Hg.): Alles Zucker! Nahrung – Werkstoff – Energie, Neue Beiträge zur Technikgeschichte und Industriekultur; Schriftenreihe der Stiftung Deutsches Technikmuseum Berlin, Bd. 2, Berlin-Brandenburg 2017, 227-237
  • M. Shamsuyeva, H.-J. Endres (2017): Polyelectrolyte Treatment of Cellulose Fibers for the Manufacture of Novel Bio-Hybrid Fiber Composites (bio-HFC) for Lightweight ApplicationsKey Engineering Materials, 742, 389-394
    DOI: 10.4028/www.scientific.net/KEM.742.389
  • O. Hansen, C. Panescu, H.-J. Endres, A. Goldin (2017): Natural Fire Reinforced Plastics for Aviation Applicationbio-fibre magazine 1-2, 14-19
  • S. Rettenberger, F. Bittner, H.-J. Endres, J. Hiller (2017): Blick in belastete Composite-Bauteile - In-Situ-CT 4-Punkt-Biegeversuche für die FVK-EntwicklungKonstruktion 5/2017, 10-13
  • V. Venkatachalam, D. Jahn, S. Spierling, A. Siebert-Raths, H.-J. Endres (2017): Mechanical and environmental properties of recyclates from bio-based plasticsPolymer Processing 11/2017, 617-622
  • Behrens, B.-A.; Dannenberg, M.; Mohammadifard, S.; Offers, J.-D.; Santangelo, A. (2016): Produktionsangepasste Konstruktionwt Werkstattstechnik online Jahrgang 106, H. 3, S. 175-180
  • C. Vogt, H.-J. Endres, J. Bühring, H. Menzel (2016): Reduction of the Elongation at Break of Thermoplastic Polyolefins through Melt Blending with Polylactide and the Influence of the Amount of Compatibilizers and the Viscosity Ratios of the Blend Components on Phase Morphology and MechanicsPolymer Engineering and Science
    DOI: 10.1002/pen.24319
  • D. Bellušová, S. Mauer, H.-J. Endres (2016): Lösen Biokunststoffe unser Plastikproblem?Oekoskop - Fachzeitschrift der Ärztinnen und Ärzte für Umweltschutz 2
  • H.-J. Endres (2016): Biobasierte Kunststoffe – Modetrend oder Polymerwerkstoffe der Zukunft?initiativ. ContiTech. Das Contitech Magazin 1, 12-15
  • H.-J. Endres, A. Siebert-Raths (2016): Co-PolyesterBioplastics magazine 5, 60-61
  • H.-J. Endres, J. Henkel, A. Siebert-Raths (2016): Beitrag abbaubarer Kunststoffe zur Marine-Litter-ProblematikKunststoffe 1, 20-22
  • J. Bauer, C. Westphalen, W. Bidlingmaier, M. Hiebel, D. Maga, S. Kabasci, T. Hartmann, L. Kroll, A. Dörgens, A. Siebert-Raths, T. Fell, M. Mäurer, K. Jesse, A. Lieske, D. Bellušová, S. Mauer, H.-J. Endres (2016): Nachhaltige Verwertungsstrategien für Abfälle aus biobasierten Kunststoffen - Die Rohstoffkosten mittels Recycling senkenPlastverarbeiter 7
  • M. Neudecker, H.-J. Endres (2016): Wall thickness dependent flow characteristics of bioplasticsBioplastics magazine, 3, 22-23
  • M. Shamsuyeva, H.-J. Endres (2016): Various Sectors Benefit from Bio-Hybrid Fiber Compositebio-fibre Magazine 12, 218-219
  • S. Albrecht, H.-J. Endres, E. Knüpffer, S. Spierling (2016): Biokunststoffe – quo vadis? Eine ökologische und sozio-ökonomische Betrachtunguwf UmweltWirtschaftsForum 24, 55-62
    DOI: 10.1007/s00550-016-0390-y
  • C. Vogt, H.-J. Endres, J. Bühring (2015): Making tailor-made high performance Thermoplastic Polyolefin (TPO)/ Polylactide (PLA) blends for automotive interior applications by irradiation73rd Annual Technical Conference of the Society of Plastics Engineers
  • H. Behnsen, H.-J. Endres, C. Habermann, F. Jürgens, N. Lack, J. Sambleben, C. Schulz, A. Siebert-Raths, S. Spierling (2015): Zahlen, Daten, Fakten. Eine Betrachtung des BiokunststoffmarktesGIT Laborfachzeitschrift 9, 35-37
  • H.-J. Endres (2015): Market overview, processing routes, feedstock requirements and land use of bio-based plasticsGreen Polymer Chemistry 2015 - Conference Proceedings, Köln
  • H.-J. Endres (2015): Vehicle body made from cotton, hemp, and woodResearch News der Fraunhofer-Gesellschaft 1
  • H.-J. Endres (2015): Karosserie aus Baumwolle, Hanf und HolzForschung Kompakt der Fraunhofer-Gesellschaft 1
  • H.-J. Endres, F. Jürgens, C. Habermann, S. Spierling, H. Behnsen, C. Schulz (2015): Eine nachhaltige Alternative? Über Sinn und Unsinn des Einsatzes von BiokunststoffenKunststoffe 7, 22-27
  • M. Neudecker, H.-J. Endres (2015): Bioplastics injection mouldingBioplastics magazine 3, 18-19
  • N. Lack-Ersöz, H.-J. Endres (2015): „Bio“ – die neue Art KunststoffIndustrieanzeiger 26, 16
  • T. Koplin, S. Spierling, H.-J. Endres, A. Siebert-Raths (2015): Influence of cellulosic filler content and morphology on the drying and processing of polylactide acid (PLA) compositesAnnual technical conference of the society of plastic engineers (ANTEC 2015), Orlando,
  • D. Jahn, H.-J. Endres (2014): Naturally Cost-EffectiveKunststoffe International 5, 36-38
  • D. Jahn, H.-J. Endres (2014): Natürlich auch wirtschaftlichKunststoffe 5, 68-71
  • H.-J. Endres (2014): Biokunststoffe – Verpackungswerkstoffe der Zukunft?DMZ 11, 20-23
  • H.-J. Endres, A. Siebert-Raths, H. Behnsen, C. Schulz (2014): Biopolymers facts and statistics
  • H.-J. Endres, C. Habermann (2014): The Project: Sustainability Racing – The Vision: Mobility of the FutureJ. Wellnitz, A. Subic, R. Trufin (Eds.): Sustainable automotive technologies 2013. Proceedings of the 5th International Conference ICSAT 2013, Cham u.a., 269-275
  • H.-J. Endres, C. Habermann, S. Spierling (2014): Bio im Kunststoff – Naturfaserverstärkte Kunststoffe und mineralhaltige Verbundwerkstoffe im VergleichPlastverarbeiter 9, 88-91
  • H.-J. Endres, M. Kohl, H. Behnsen (2014): Biobasierte Kunststoffe und biobasierte VerbundwerkstoffeFachagentur Nachwachsende Rohstoffe (Hg.): Marktanalyse Nachwachsende Rohstoffe, Schriftenreihe Nachwachsende Rohstoffe, Bd. 34,200-310
  • M. Neudecker, H. Endres (2014): Processing and manufacturing of natural fiber reinforced plastics to specimens for generating simulation data (NFC-simulation)72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), Las Vegas, 28-30 April, Vol. 1
  • S. Spierling, T. Koplin, H.-J. Endres (2014): Hemp fines – an agricultural by-product for biocomposites? A holistic approachST Smith (Ed.), 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), Vol. 2, 9-12 December, Lismore, Byron Bay
    ISBN: 978-0-99415-200-8
  • T. Koplin, H.-J. Endres, G. Ziegmann, A. Siebert-Raths (2014): Influence of moisture of the basic raw materials on the mechanical and rheological properties of Polylactide cellulose fiber composites made by twin screw extrusion72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), Las Vegas, 28.-30. April, Vol. 1
  • A.-S. Kitzler, H.-J. Endres (2013): Kaskadennutzung von Biopolymeren – Grundlegende Untersuchungen zur Entsorgung von Biopolymeren3. Wissenschaftskongress Abfall- und Ressourcenwirtschaft, DGAW, Stuttgart, März 2013, 31–36
  • D. Jahn, A. Siebert-Raths, H.-J. Endres (2013): Biokunststoffe als Kunststoffe der Zukunft, Teil IICebra. Zeitschrift für effiziente Beschaffung rund um Büro und Arbeitsplatz, Oktober 8, 36
  • H.-J. Endres (2013): Biokunststoffe als Werkstoffe der Zukunft; Teil ICebra. Zeitschrift für effiziente Beschaffung rund um Büro und Arbeitsplatz, April 3, 48-50
  • H.-J. Endres, A. Siebert-Raths (2013): Biological ResistanceG. Ehrenstein, S. Pongratz (Eds.): Resistance and Stability of Polymers
    ISBN: 978-1-56990-456-5
  • H.-J. Endres, A. Siebert-Raths (2013): Biodegradable PlasticsG. Ehrenstein, S. Pongratz (Eds.): Resistance and Stability of Polymers
  • P. Helmke, H.-J. Endres, M. Nelles (2013): Spritzgießen von cellulosefaserverstärktem Polypropylen für InterieuranwendungenVDI-Wissensforum GmbH/VDI-Gesellschaft Materials Engineering (Hg.): Kunststoffe im Automobilbau, Düsseldorf, 33-40
  • T. Koplin, H.-J. Endres, G. Ziegmann (2013): Characterization of the property-defining Parameters for Compounding of Polypropylene with Cellulose Fibers6th International Wood Fibre Polymer Composites Symposium, Proceedings, Biarritz
  • T. Koplin, H.-J. Endres, G. Ziegmann (2013): Influence of the melting zone on compounding of cellulose fiber reinforced polylactide71st Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2013), Cincinnati, Ohio, USA 22.-24. April, Vol. 1
  • A. Siebert-Raths, H.-J. Endres, S. de Vos (2012): Specialties of the Processing of PLA through Extrusion and Injection Molding, and resulting characteristics70th annual technical conference of the Society of Plastics Engineers 2012, (ANTEC 2012):Orlando, Florida, USA, 1 - 5 April 2012, Vol. 1-3; Society of Plastics Engineers; Red Hook, NY
  • A.-S. Kitzler, H.-J. Endres, A. Schettler, M. Nelles (2012): Neue VerwertungswegeRecycling magazin 8, 68-71
  • A.-S. Kitzler, H.-J. Endres, A. Schettler, M. Nelles (2012): Basics of the 14C methode – how to use radiocarbon dating to determine the biobased carbon contentBioplastics Magazine 2, 50-53
  • A.-S. Kitzler, H.-J. Endres, M. Nelles (2012): Recyclingfähigkeit von BiokunststoffenTagungsband 15. Dialog Abfallwirtschaft MV Rostock, 121-132
  • A.-S. Kitzler, H.-J. Endres, M. Nelles (2012): Kaskadennutzung von Biopolymeren durch vorteilhafte EntsorgungsoptionenTagungsband 2. Wissenschaftskongress Abfall- und Ressourcenwirtschaft Rostock, März 2012, 271-277
  • H.-J. Endres (2012): Mehrfachnutzen. Biobasierte KunststoffeUnternehmermagazin 4-5, 20-21
  • H.-J. Endres (2012): Bioconcept Car – Synergy of Bioplastics and BiocompositesAndrzej K. Bledzki, Volker E. Sperber (Eds.): Tagungsband 9th WPC, Natural Fibre and other innovative Composites Congress and Exhibition, 19.- 20. Juni, Stuttgart/Fellbach
  • H.-J. Endres, A. Siebert-Raths (2012): Performance Profile of Biopolymers Compared to Conventional PlasticsK. Matyjaszewski, M. Möller (Eds.): Polymer Science: A Comprehensive Reference, Vol. 10, 317-353
  • H.-J. Endres, C. Schulz (2012): Biopolymere in die SpritzgießmaschineIndustrieanzeiger 24, 47-49
  • H.-J. Endres, T. Koplin, C. Habermann (2012): Technology and Nature Combined? – BiocompositesKunststoffe International 6, 18-21
  • H.-J. Endres, T. Koplin, C. Habermann (2012): Technik und Umwelt vereint? – BioverbundeKunststoffe 6, 20-24
  • H.-J. Endres, T. Koplin, C. Habermann, M. Neudecker (2012): Compounds: Eco-Friendly and Cost-EffectiveKunststoffe international 12, 27–31
  • H.-J. Endres, T. Koplin, C. Habermann, M. Neudecker (2012): Compounds: Umweltfreundlich und wirtschaftlichKunststoffe 12, 40–44
  • M. Bengs, H.-J. Endres, A. Siebert-Raths (2012): Market situation and possibilities for information procurement of biopolymers (Biopolymer Database)70th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2012), Vol. 1, 177-181
  • P. Helmke, H-.J. Endres, M. Nelles, T. Koplin (2012): Coloring Cellulose Fiber - Reinforced PolypropyleneKunststoffe international 4, 21-24
  • P. Helmke, H-.J. Endres, M. Nelles, T. Koplin (2012): Einfärben von zelluloseverstärktem PolypropylenKunststoffe 4, 36-40
  • T. Koplin, H.-J. Endres (2012): Influence of fiber morphology on material properties of NFCAndrzej K. Bledzki, Volker E. Sperber (Eds.): Tagungsband 9th WPC, Natural Fibre and other innovative Composites Congress and Exhibition, Stuttgart/Fellbach, 19.- 20. Juni
  • A. Siebert-Raths, H.-J. Endres (2011): Biopolymere: Entwicklung und MarktsituationDichtungstechnik, Jahrbuch 2011, S. 58-65
    ISBN: 978-3-9811509-4-0
  • A. Siebert-Raths, H.-J. Endres, S. de Vos, G.G.J. Schennink (2011): Polylactid für technische Anwendungen modifizierenKunststoffe 5/2011, S. 99-104
  • A. Siebert-Raths, H.-J. Endres, S. de Vos, G.G.J. Schennink (2011): Modification of Polylactide for Technical ApplicationsKunststoffe international 5/2011, S. 61-65
  • A.-S. Kitzler, H.-J. Endres, M. Nelies (2011): Vergärung von Biopolymer-Verpackungen - Eine sinnvolle Verwertungsoption?Tagungsband - 8. Biogastagung Dresden 2011, Band 81, S. 117-122
  • H.-J. Endres (2011): Biokunststoffe als nachhaltige Werkstoffe der Zukunft. Eine Orientierung von Hans-Josef Endrescreativ verpacken 5/2011, S. 24
  • H.-J. Endres, A. Siebert (2011): Biokunststoffe: Neue BiopolymerdatenbankPlastiker, 13.2.2007 http://plasticker.de/Kunststoff_News_3079_Biokunststoffe_Neue_Biopolymerdatenbank?begriff=siebert&div=n [25.11.2011]
  • H.-J. Endres, A. Siebert-Raths (2011): Basics of PHABioplastics Magazine 02/11, S. 12-15
  • H.-J. Endres, A. Siebert-Raths (2011): Engineering Biopolymers
    ISBN: 978-3-446-42403-6
  • H.-J. Endres, A.-S. Kitzler, M. Nelles, A. Siebert-Raths (2011): Biopolymers as a Sustainable AlternativeKunststoffe international 5/2011, S. 15-20
  • H.-J. Endres, A.-S. Kitzler, M. Nelles, A. Siebert-Raths (2011): Biopolymere als nachhaltige Alternative?Kunststoffe 5/2011, S. 34-40
  • H.-J. Endres, M. Bengs, C. Schulz, A. Siebert-Raths (2011): Bioplastics - Market Opportunities, Land Use Requirements and Future Developments of BioplasticsKunststoffe International 9/2011, S. 54-58
  • H.-J. Endres, M. Bengs, C. Schulz, A. Siebert-Raths (2011): Biopolymere - Marktchancen, Flächenbedarf und künftige EntwicklungenKunststoffe 9/2011, S. 105-110
  • M. Bengs, H.-J. Endres, A. Siebert-Raths, E. Baur (2011): Biopolymer database - Evaluating quantity, quality and comparability of biopolymer materials69th Annual Technical Conference of the Society of Plastics Engineeres (ANTEC 2011), Volume 1 of 3, S. 216-218
  • A. Siebert-Raths, H.-J. Endres (2010): Biopolymere: Entwicklung und MarktsituationK.-F. Berger, S. Kiefer (Hg.): Dichtungstechnik, Jahrbuch 2011, Mannheim 2010, S. 58-65
    ISBN: 978-3-9811509-4-0
  • C. Laußmann, H.-J. Endres, U. Giese, A.-S. Kitzler (2010): Verbrennungsverhalten von Biopolymeren und energetische NutzungKGK Kautschuk Gummi Kunststoffe, 10/2010, S. 446-452
  • C. Laußmann, H.-J. Endres, U. Giese, A-S. Kitzler (2010): Disposal of Bio-Polymers via Energy RecoveryBioplastics Magazine 01/10, S. 42-43
  • C. Laußmann, H.-J. Endres, U. Giese, A.-S. Kitzler (2010): Burning Behavior of Biopolymers and Energetic BenefitsKGK rubberpoint 63(10):446-452
  • H.-J. Endres (2010): Bioplastics – still a lot to research European Bioplastics newsletter Berlin, Dezember 2010
  • H.-J. Endres, C. Laußmann, U. Giese, A.-S. Kitzler (2010): Biopolymere als EnergieträgerKunststoffe, 08/2010, S. 103-106
  • H.-J. Endres, C. Laußmann, U. Giese, A.-S. Kitzler (2010): Biopolymers as a Source of EnergyKunststoffe International, 8/2010, S. 83-85
  • H.-J. Endres (2009): Biokunststoffe – weit mehr als ein ModetrendZulieferMarkt Oktober 2009, S. 19
  • H.-J. Endres, A. Siebert, M. Bengs (2009): Evaluating Quantity, Quality and Comparability of Biopolymer MaterialsBioplastics Magazine 06/09, S. 38-41
  • H.-J. Endres, A. Siebert-Raths (2009): Raw materials and arable land required for biopolymersBioplastics Magazine 05/09, S. 34-37
  • H.-J. Endres, A. Siebert-Raths (2009): Technische Biopolymere
    ISBN: 978-3-446-41683-3
  • H.-J. Endres, A. Siebert, A.-S. Kitzler (2008): Biopolymers – a discussion on end of life optionsBioplastics Magazine 01/08, S. 22-25
  • H.-J. Endres, A.-S. Kitzler, M. Nelles (2008): Ökologische Nachhaltigkeit von VerpackungenDMZ 11, S. 24-27
  • N. Graupner, H.-J. Endres, J. Müssig (2008): Influence of Fiber Fineness, Fiber Maturity and Nep Content on the Properties of Natural Fiber Reinforced Cotton-Epoxy CompositesJournal of Natural Fibers, Vol. 5(4), S. 289-315
  • A. Siebert, H.-J. Endres (2007): Generation of a new Biopolymer DatabaseBioplastics Magazine 01/07, S. 12
  • A. Siebert, H.-J. Endres, O. Josef, T. Bock (2007): Kunststoffgehäuse auf dem MotorenprüfstandKunststoffe 11, S. 129-132
  • A. Siebert, H.-J. Endres, O. Josef, T. Bock (2007): Plastic Housing on an Engine Test StandKunststoffe International 11, S. 77-80
  • H.-J. Endres, A. Siebert, Y. Kaneva (2007): Overview of the current biopolymers market situationBioplastics Magazine 03/07, S. 31-33
  • H.-J. Endres (2006): Neue Materialien: Kunststoff „pfropft“ auf HolzChem. Rundschau 10, S. 56-58
  • H.-J. Endres, C. Rulle, R. Schaldach (2006): Bambusfaser als Verstärkungskomponente in VerbundwerkstoffenBambus-Journal 2, S. 10-13
  • H.-J. Endres, D. Kroisová, T. Vacková (2006): Biopolymer Composites with Natural Cellulose Based Fibres as a Filler - Production and Properties4th International PhD Conference on Mechanical Engineering - PhD 2006, September 11-13, 2006, Pilsen, Czech Republic
  • H.-J. Endres, K. Hausmann, P. Helmke (2006): Influence of different types and contents of coupling agents on PP-wood sawdust-compoundsKGK rubberpoint 59(7):399-404
  • H.-J. Endres, K. Hausmann, P. Helmke (2006): Untersuchungen des Einflusses unterschiedlicher Haftvermittler und Haftvermittlergehalte auf PP-Holzmehl-CompoundsKGK Kautschuk Gummi Kunststoffe 7/8, S. 399–404
  • M.-L. Rottmann Meyer, T. Lührs, H.-J Endres et al. (2005): Pflanzenöle als Kraft- und Schmierstoffe, Schulungsunterlagen der Landwirtschaftskammer Hannover, Hannover
  • H.-J Endres, G. Helmke (2004): Situation der Biogaserzeugung und Potenzial der Biogasproduktion in NiedersachsenB. Grabkowsky (Hg.): Biogasnutzung in Niedersachsen, Weiße Reihe, Band 23, Vechta
  • H.-J. Endres (2004): Technische Möglichkeiten und ökonomische Konsequenzen alternativer Überschussverwertung von Milch, Milchfett und Butter Studie im Auftrag der Landesvereinigung der Milchwirtschaft, Hannover
  • P. Špatenka, H.-J. Endres, R.W. Cook, J. Krumeich (2002): Influence of power dissipated into the plasmaPlasma and Polymers 6
  • P. Špatenka, V. Brunnhofer, J. Krumeich, J. Blazek, H.-J. Endres, R.W. Cook (2000): Industrial-Scale Process Control by Means of Electrostatics ProbesPlasma and Polymers, 5, S. 255
  • P. Špatenka, H.-J. Endres, J. Krumeich, R.W. Cook (1999): Process control of plasma polymerization in a large industrial reactorSurface and Coatings Technology, 116-119, S. 1228-1232
  • H.-J. Endres, A. Pries, J. Wüppenhorst (1997): Realisierung einer umweltfreundlichen Trainings- und Übungsmunition durch Einsatz neuartiger Werk- und WirkstoffeSoldat und Technik
  • H.-J. Endres (1996): Stärke - nachwachsender Rohstoff ist großtechnisch verarbeitbar; C.A.R.M.E.N (Hg.), Rimpar
  • H.-J. Endres (1995): Herstellung und Eigenschaften biologisch auf- und abbaubarer Werkstoffe auf Basis von Polysacchariden, Dissertation Ruhr-Universität Bochum
  • H.-J. Endres (1995): Stärke - nachwachsender Rohstoff als Komponente für VerbundwerkstoffeC.A.R.M.E.N., Rimpar
  • H.-J. Endres, A. Pries (1995): Fertigungstechnische Entwicklung zur Erzeugung biologisch abbaubarer Verbundwerkstoffe auf Basis von Stärke Studie im Auftrag des Bayer. Staatsministeriums für Ernährung, Landwirtschaft und Forsten, Fördernummer: G3-7235.3.-1177
  • H.-J. Endres, A. Pries (1995): Mechanische Eigenschaften stärkegefüllter PolymerverbundeStärke/Starch 47, S. 384-393
  • H.-J. Endres, H. Kammerstetter, M. Hobelsberger (1995): Plastification Behaviour of Different Native Starches, C.A.R.M.E.N (Hg.), Rimpar
  • (1994): Plastification Behaviour of Different Native StarchesStärke/Starch 46, S. 474-480
  • H. Kammerstetter, A. Pries, H.-J. Endres (1994): Entwicklung biologisch abbaubarer Einwegverpackungen für LebensmittelStudie im Auftrag des BMFT, Förderzeichen: 01 ZV 8914/5
  • H.-J. Endres (1994): Study on Production of Thermo-Bioplastics and Fibres based mainly on Biological MaterialsStudie im Auftrag der EC, Directorate-General XII, Science, Research and Development, Projekt-Nr.: EUR 16102 EN
  • J. Schroeter, H.-J. Endres (1992): Eigenschaften thermoplastisch verarbeiteter reiner KartoffelstärkeKunststoffe 82, S.1086-1089
  • J. Schroeter, M. Hobelsberger, H.-J. Endres (1992): Grundlagenuntersuchung zur Eignung von Stärke als Komponente in biologisch abbaubaren VerbundwerkstoffenStudie im Auftrag des Bayer. Staatsministeriums für Ernährung, Landwirtschaft und Forsten, Fördernummer: M5-7007.1-377I