Extrusion Plastometer MFI/MVR ZwickRoell Aflow
Manufacturer: ZwickRoell GmbH & Co. KG
Short description: Extrusion plastometer for plastics, containing fluorine / fluorine free in accordance with the standard ISO 1133.
Test material: plastic granulates, containing fluorine/fluorine free
Application: The Aflow extrusion plastometer is designed to perform MFR and MVR tests in accordance with methods A, B, C and D. This can be done using an automatic extrudate cutter and balance. Tests can be performed in accordance with standard ISO 1133.
| Technical Data | |
| Test temperature | 50 °C up to 450 °C |
| Test load | stepless 0.325 to 50 kg |
| Cooling unit | Compressed air |
| Nozzle dimension | 2.095 × 8 mm |
| Test standards | DIN EN ISO 1133 |
Extrusion Plastometer MFI/MVR ZwickRoell Mflow
Manufacturer: ZwickRoell GmbH & Co. KG
Short description: Extrusion plastometer for plastics, containing fluorine / fluorine free in accordance with the standard ISO 1133.
Test material: lastic granulates, containing fluorine/fluorine free
Application: The Mflow extrusion plastometer is designed to perform MFR and MVR tests in accordance with methods A, B and C. Due to its modular design, it is particularly suitable for very free-flowing (recycled) materials.
| Technical Data | |
| Test temperature | +50 °C up to +400 °C |
| Test loads | 0.325 kg, 2.16 kg, 5 kg, 10 kg and 21.6 kg |
| Typical measurement range | Min.: ca. 0.1 g/10 min Max.: ca. 2,000 g/10 min |
| Nozzle dimension | 2.095 x 8 mm |
| Test standards | DIN EN ISO 1133 |
